1985-1990 Case/International 385, 485, 585, 685 & 885 Diesel Tractor Shop Manual
Technical reference spanning Case/International 385, 485, 585, 685 & 885 Diesel Tractor models. Covers engine, brakes, clutch, steering, hydraulics, and more. Ref: 385-485-585-685-885
Manual Preview
Sample pages from the 1985-1990 Case/International 385, 485, 585, 685 & 885 Diesel Tractor Shop Manual manual
Purchase & Download
Models Covered & Key Technical Specifications
Case/International 385, 485, 585, 685 & 885 Diesel Tractor Shop Manual (1985-1990) - Repair-Index Case/International 385, 485, 585, 685 & 885 (1985-1990) | Diesel Tractor Packet. Authorized Capacity Limits: 3.0 U.S. gal. (11.4 L) defines the cooling system capacity Specifications. Critical Play Limits: 0.0031-0.0047 inch (0.079-0.119 mm) is the maximum allowable wear on the sleeve flange. Operational Speed Rating: 2400 rpm is the maximum rated engine speed for the Model 885. Established Current Rating: 45.0 amperes is the maximum alternator output at 6000 rpm. Measured System Volume: 10 U.S. qts. (9.5 L) signifies the crankcase oil capacity. Maximum Benchmarks: 110 ft.-lbs. (149 N·m) is the specified torque for the rear cab mounting bolts.
Manual Description & Preview
Consolidated Service Manual: Case/International Shop Manual for Diesel Tractor Models 385, 485, 585, 685 & 885 (1985-1990) Repair-Index
| Engineering-Metrics: Case/International // Reference-Category: Tractor / Diesel Logic // Series-Validation: 1985-1990 Tractor Service Manual | Assessment-Parameter | Operational-Logic | Calibration-Data |
|---|---|---|---|
| Engine Specifications | Bore: 3.875 inches (98.4 mm) | Displacement: 155 cu. in. (2.54 L) for Model 385 | |
| Clutch System | Number of Discs: 4 Friction Discs | Pressure Plate Torque: 5-6 ft.-lbs. (7-8 N·m) | |
| Hydraulic System | Pump Output: 3 GPM (11.35 L/min) | Relief Valve Setting: 2500 psi (17238 kPa) | |
| Brake System | Pedal Height: 8-1/4 inches (210 mm) | Park Brake Adjustment: 10 lbs. (44.48 N) for light duty | |
| PTO System | Speed Options: 540/1000 RPM | Clutch Engagement Pressure: 260-270 psi (1790-1860 kPa) | |
| Electrical System | Alternator Output: 45.0 Amperes | Brush Length (New): 0.8 inch (20.0 mm) |
Diagnostic procedures address the internal workings of your Case/International tractor. This manual provides comprehensive guidance for maintenance and repair procedures.
Engine and Components
Accurately mandating engine specifications, this section details the D-155, D-179, D-206, D-239, and D-268 diesel engines, including bore, stroke, and displacement figures for each model.
R&R Engine Assembly
Procedures for removing and reinstalling the engine assembly are thoroughly documented, including necessary disconnections and component replacements.
Engine Balancer
Details on the engine balancer system, its components, and critical timing procedures to counteract inherent vibrations in four-cylinder engines are provided.
PTO Clutch, Shafts and Gears
This section covers the removal, overhaul, and reassembly of the PTO clutch, shafts, and gears, including specifications for both standard and heavy-duty units.
Hydraulic Lift System
Discussions on the hydraulic lift system, its load and position control functions, and the locations of key components like the torsion bar and MCV are included. This covers the troubleshooting and testing of the hydraulic system.
FAQ
Customer Reviews
Read what our customers say about this Case Tractor manual and share your own experience.